GENERAL LIGHTING AND RECEPTACLE LOADS AND SMALL-APPLIANCE AND LAUNDRY LOADS COLUMN 1 – TABLE 220.42

06/01/2019

DEMAND LOAD 2 TABLE 220.55, COLUMN C The demand load of cooking equipment is calculated in kW. The maximum demand for the size and number of ranges is already calculated for selecting the elements of the feeder or service. Therefore, cooking equipment does not need to be multiplied by the kW rating of the unit by a percentage until Columns A or B are utilized. See Figure 22-8 for demand loads that shall be permitted to be applied in Table 220.55, Column C. Also, see Figures 14-4 thru 14-11.

05/15/2019

COOKING EQUIPMENT LOADS COLUMN 2 – 220.55 AND TABLE 220.55  The cooking equipment loads and Demand load 2 are separated from Group 3 and placed in Column 2, and demand factors applied accordingly. The demand factors listed in Table 220.55 apply to the demand loads for cooking equipment. The Footnotes are based on the kW rating and number of units. Ranges, wall-mounted ovens, and counter-mounted cooktops are units of cooking equipment per Table 220.55. See Figure 22-7 for the demand factors

04/15/2019

DEMAND FACTORS ARTICLE 220, PART III The following four loads are separated into two columns of loads and demand factors are applied: Column 1: General lighting and receptacle loads  and small-appliance loads Table 220.42 Column 2: Cooking equipment loads 220.55 and Table 220.55 Fixed-appliance loads 220.53 Dryer loads 220.54 and Table 220.54 General lighting and receptacle loads and the small-appliance circuits plus laundry circuit shall be permitted to have demand factors applied. The